Publications

  1. Lokesh Kulhari, Kanad Ray, Ankit Paptan, Nikhil Suri, P.K. Khanna, Development of LTCC micro‐hotplate with PTC temperature sensor for gas sensing applications, International Journal of Applied Ceramic Technology, (2020), DOI: https://doi.org/10.1111/ijac.13465.
  2. Nidhi Chaturvedi, Kuldip Singh, Pharyanshu Kachhawa, Richard Lossy, Shivanshu Mishra, Ashok Chauhan, Dheeraj K Kharbanda, Amber Kumar Jain, Rajiv Ranjan Thakur, Devanshu Saxena, Pramod K Khanna, Joachim Wuerfl, AlGaN/GaN HEMT based sensor and system for polar liquid detection, Sensors and Actuators A: Physical, 302, 111799, (2019), DOI: https://doi.org/10.1016/j.sna.2019.111799.
  3. Niketa Sharma, Shivanshu Mishra, Kuldeep Singh, Nitin Chaturvedi, Ashok Chauhan, C. Periasamy, Dheeraj Kumar Kharbanda, Priyavart Parjapat, P. K. Khanna, and Nidhi Chaturvedi, High Resolution AlGaN/GaN HEMT based Electrochemical Sensor for Biomedical Applications, IEEE Transactions on Electron Devices, 67(1), (2019), 289-295, DOI: 10.1109/TED.2019.2949821
  4. Lokesh Kulhari, Achu Chandran, Kanad Ray, P.K. Khanna, Design, fabrication and characterization of LTCC micro-hotplates for gas-sensing application, Microelectronics International, (2019), DOI: https://doi.org/10.1108/MI-06-2019-0035.
  5. D.K. Kharbanda, N. Suri, P.K. Khanna, Electro-thermal simulation and fabrication of LTCC hotplate with lead-free interconnects, Soldering & Surface Mount Technology, (2019), DOI: https://doi.org/10.1108/SSMT-02-2019-0007.
  6. Soumendu Sinha, Ravindra Mukhiya, Rishi Sharma, P. K. Khanna V. K. Khanna, Fabrication, characterization and electrochemical simulation of AlN-gate ISFET pH sensor, Journal of Materials Science: Materials in Electronics, 30, (2019) 7163–7174.
  7. N. Chaturvedi, S. Mishra, S. Dhakad, N. Sharma, K. Singh, N. Chaturvedi, R. Taliyan, A. Chauhan, P. Prajapat, D. K. Kharbanda, and P. K. Khanna, Development of GaN HEMTs based Biosensor, The Physics of Semiconductor Devices, Springer, Chapter 34, (2019), 225-229, DOI: https://doi.org/10.1007/978-3-319-97604-4_34.
  8. D.K. Kharbanda, N. Suri, P.K. Khanna, Design, fabrication and characterization of laser patterned LTCC micro hotplate with stable interconnects for gas sensor platform, Microsystem Technologies, 25(6), (2019) 2197-2204, DOI: https://doi.org/10.1007/s00542-018-4079-8.
  9. Nidhi Chaturvedi, Richard Lossy, Kuldip Singh, Dheeraj K Kharbanda, Shivanshu Mishra, Ashok Chauhan, Kaushal Kishore, Pramod K Khanna, Joachim Wuerfl, Design and Development of Gallium Nitride HEMTs Based Liquid Sensor, IEEE Sensors, (2018) 1-3.
  10. Lokesh Kulhari, P.K. Khanna, Design, simulation and fabrication of LTCC-based microhotplate for gas sensor applications, Microsystem Technologies, 24 (2018) 2169-2175.
  11. A. Chandran, P. K. Khanna, D. Haranath, A. M. Biradar, Interfacial behavior of confined mesogens at smectic-C*–water boundary, Physical Review E, 97 (2018) 022701.
  12. Duguta Suresh Kumar, Nikhil Suri, P.K. Khanna, Stable interconnections for LTCC micro-heater using isothermal solidification technique, 30 (2017) 35-41.
  13. A. Chandran, T. Joshi, P. K. Khanna, D. S. Mehta, D. Haranath, A. M. Biradar, Alignment of smectic mesogens over engineered surfaces, Journal of Applied Physics, 122 (2017) 014101.
  14. S. K. Saha, M. K. Paul, A. Chandran, P. K. Khanna, A. M. Biradar, Low-temperature nematic phase in asymmetrical 1, 3, 4-oxadiazole bent-core liquid crystals possessing lateral methoxy group, Liquid Crystals, 44 (2017) 1739-1750.
  15. Amanpal Singh, Dinesh Kumar, P.K. Khanna, Mukesh Kumar, Reduction in point defects of sol–gel derived ZnO thin films with oxygen ambient, Materials Letters, 183 (2016) 365-368.
  16. J. Prakash, A. Chandran, A. M. Biradar, Scientific developments of liquid crystal-based optical memory: a review, Reports on Progress in Physics, 80 (2016) 016601.
  17. Duguta Suresh Kumar, Nikhil Suri, P.K. Khanna, R.P. Sharma, Study of the Oxidaton Effects on Isothermal Solidification Based High Temperature Stable Pt/In/Au and Pt/In/Ag Thick Film Interconnections on LTCC Substrate, Advancement in Science and Technology, American Institute of Physics, 1715 (2016) 1-10.
  18. Amanpal Singh, Sonia Saini, Dinesh Kumar, P.K. Khanna, Mukesh Kumar, and B. Prasad, Influence of doping precursor on band gap and morphologies of sol-gel deposited ZnMgO thin films, Physica Status Solidi, C11 (2014) 1488-1498.
  19. Monika Dubey, N. Suri, P.K. Khanna, Optimization of Shrinkage and Surface-roughness of LTCC Tape, International Journal of Research in Engineering and Technology, 2 (2013) 441-444.
  20. Amanpal Singh, Dinesh Kumar, P.K. Khanna, Mukesh Kumar, B. Prasad, Post annealing effect on structural and optical properties of ZnO thin films derived by sol-gel route, Journal of Materials Science: Materials in Electronics, 24 (2013) 4607-4613.
  21. R.P. Sharma, P.K. Khanna, Lead free packaging of Pt microheater for high temperature gas sensors, Fuel, 112 (2013) 550-556.
  22. Amanpal Singh, Ankush Vij, Dinesh Kumar, P.K. Khanna, Mukesh Kumar, Sanjeev Gautam, K H Chae, Investigation of phase segregation in sol-gel derived ZnMgO thin films, Semiconductor Science and Technology, 28 (2013) 1-8.
  23. Amanpal Singh, Dinesh Kumar, P.K. Khanna, Mukesh Kumar, B. Prasad, Phase segregation limit in ZnCdO thin films deposited by sol-gel Method: A study of structural, optical and electrical properties, ECS Journal of Solid State Science and Technology, 2 (2013) Q136-Q141.
  24. Amanpal Singh, Jagbir Deshwal, Dinesh Kumar, P.K Khanna, Mukesh Kumar, Band gap modulation in ZnO thin films through Cd doping by sol-gel method and its characterizations, ECS Transactions, 45 (2012) 179-188.
  25. Amanpal Singh, Dinesh Kumar, P.K. Khanna, B.C. Joshi, Mukesh Kumar, Effect of post annealing temperature on structural and optical properties of ZnCdO thin films deposited by sol-gel method, Applied Surface Science, 258 (2011) 1881-1887.
  26. Amanpal Singh, D. Kumar, P.K. Khanna, Anuj Kumar, Mukesh Kumar, Dielectric anomaly in Mg doped ZnO thin film deposited by sol-gel method, Journal of the Electrochemical Society, 158 (2011) G9-G12.
  27. Amanpal Singh, Dinesh Kumar, P.K. Khanna, Anuj Kumar, Mukesh Kumar, Mohit Kumar, Anomalous behavious in ZnMgO thin films deposited by sol-gel method, Thin Solid Films, 519 (2011) 5826-5830.
  28. R.P. Sharma, P.K. Khanna, D. Kumar, Isothermal solidification based packaging of biosensors at low temperatures, Thin Solid Films, 519 (2010) 1192-1195.
  29. R.P. Sharma, P.K. Khanna, D. Kumar, Development and characterization of Au-Cu seal ring for lead free packaging of MEMS devices, Thin Solid Films, 519 (2010) 987-990.
  30. Nikhil Suri, P.K. Khanna, R.P. Sharma, Annealing effects on Bi doped Se-Te system, Integrated Ferroelectrics, 120 (2010) 15-17.
  31. R.P. Sharma, P.K. Khanna, D. Kumar, N. Suri, H.C. Pandey, Realization of high packaging density on ceramics for high temperature applications, Integrated Ferroelectrics, 120 (2010) 49-55.
  32. P.K. Khanna, Amanpal Singh, N. Kumar, Chandra Shekhar, Y.K. Jain, H.C. Pandey, Characterization of smart-materials based on lead lanthanum zirconate titanate, Optoelectronics and Advanced Materials-RC, 4 (2010) 336-339.
  33. P.K. Khanna, N. Kumar, Amanpal Singh, Chandra Shekhar, Y.K. Jain, H.C. Pandey, Performance characteristics of smart-materials based on lead zirconate titanate, Materials Letters, 63 (2009) 1958-1960.
  34. Nikhil Suri, P.K. Khanna, R. Thangaraj, Optical studies of Se-Te-Bi chalcogenide thin films, Journal of Optoelectronics and Advanced Materials, 11 (2009) 794-796.
  35. A. Singh, A. Kumar, N. Suri, S. Kumar, M. Kumar, P. K. Khanna, D. Kumar, Structural and optical characterization of ZnO thin films deposited by sol-gel method, Journal of Optoelectronics and Advanced Materials, 11 (2009) 790-793.
  36. R.P. Sharma, P.K. Khanna, D. Kumar, Lead free microelectronics packaging for biomedical applications, Journal of Optoelectronics and Biomedical Materials, 1 (2009) 241-248.
  37. R.P. Sharma, P.K. Khanna, D. Kumar, Mechanical properties of Ag-Ni seal rings for micro-systems, Optoelectronics and Advanced Materials-Rapid Communications, 3 (2009) 1375-1378.
  38. Nikhil Suri, P.K. Khanna, Effect of Bi addition on Se-Te chalcogenide system: a review, Journal of Optoelectronics and Advanced Materials, 11 (2009) 399-407.
  39. P.K. Khanna, B. Hornbostel, B. Matthias, W. Schäfer, J. Dorner, Studies on three-dimensional moulding, bonding and assembling of low- temperature- cofired ceramics for MEMS and MST applications, Materials Chemistry and Physics, 89 (2005) 72-79.
  40. P.K. Khanna, S. Ahmad, R. Grimme, Molecular Weiss domain polarization in piezo ceramics to diaphragm, cantilever and channel construction in low- temperature- cofired ceramics for micro-fluidic applications, Materials Chemistry and Physics, 89 (2005) 56-63.
  41. P.K. Khanna, B. Hornbostel, R. Grimme, W. Schäfer, J. Dorner, Miniature pressure sensor and micro machined actuator structure based on low- temperature- cofired ceramics and piezoelectric material, Materials Chemistry and Physics, 87 (2004) 173-178

Patents

  1. S.K. Bhatnagar, W. Gust, P.K. Khanna, E.J. Mittemeijer, S. Sommadossi, A process for diffusion soldering, Patent No. 233097 granted on 26.03.2009, Country: INDIA
  2. S.K. Bhatnagar, W. Gust, P.K. Khanna, E.J. Mittemeijer, S. Sommadossi, A process for preparation of metallic paste and its use in diffusion soldering, Patent No. 224578 granted on 18.10.2008, Country: INDIA
  3. P.K. Khanna, S.K. Bhatnagar, A process for joining metal- to- thick-film composite system on insulating substrate, Patent No. 199610 granted on 15.12.2006, Country: INDIA